To see other variants and accessories, please enter the webcode on our website. webcode 1011 acking Testers 3 4 Digital Packing Tester Extended basic model, easy to use, suitable for routine work as well as for research and development laboratories. Compact design and small space requirement thanks to the integration of the electronic control unit, test chamber (made of PMMA) and a high-performance pump in a single unit. Vacuum control system with vacuum sensor and electronic program controller, setpoint selection in 1 mbar increments. Setting range from 0 to -500/-750 mbar (rel.). Test procedure pre-set in 4 vacuum steps with 20 sec. stop time per step. Automatic test start upon reaching the predefined vacuum. The system is then vented automatically. Safety through electronically limited maximum vacuum, plus an additional mechanical pressure limiter. Vacuum pump included. Test chambers are available in customized sizes on request. 3 Type DIDVTT-200/310 DIDVTT-300/310 Outer dimensions L × W × H mm 440×230×450 515×350×450 Useful Ø mm 190 290 Useful height mm 310 310 Useable height max. mm 310 310 Adjusting range mbar 0 up to -750 0 up to -500 Weight kg 9.7 13.0 Mains connection 230 V~/50 Hz 230 V~/50 Hz Order No. 57 32 20031 57 32 30031 Digital Packing Tester, Special Model Large model of the digital packing tester. Differs in having a square test chamber (recommended size L 500 × W 400 × H 300 mm, final size according to customer’s specifications). Test chamber with hinged lid and additional vent valve. Submersible grid made of rustproof wire mesh. Separate controller in PP housing with reinforced vacuum pump. Vacuum included in delivery. 4 Type DIDVTT-Q Outer dimensions container L × W × H mm 540 × 440 × 375 Useful dimensions container L × W × H mm 500 × 400 × 300 Useable height max. mm 250 Adjusting range mbar 0 up to -500 Weight kg 23 Mains connection 230 V~/50 Hz Order No. 57 32 50031 webcode WW39Q004 Packing Tester, Aerne Analytic For leakage testing of all types of packaging. The test vessel is filled with water and the packaging to be tested is placed under the height-adjustable immersion plate. Once a vacuum is applied, any leakage is indicated by raising air bubbles. Type Specification Useful dimensions Ø × H cm Order No. VT150 Packing tester, analogue 19 × 15 10 64 03150 VT250 Packing tester, analogue 19 × 25 10 64 04250 VT350 Packing tester, analogue 29 × 25 10 64 04350 VT250D Packing tester, digital 19 × 25 10 64 03250 VT350D Packing tester, digital 29 × 25 10 64 03350 VT QD Packing tester, digital L50 × B40 × H25 10 64 04500 Customised versions (also analog) available on request. Accessories for packing tester (available on request): Spare tanks for VT250D, VT350D and VT QD Special Analysis Food, Feedstuffs, Drugs Your specialized laboratory dealer – fast, competent and economical
RkJQdWJsaXNoZXIy MTIxNDc3OQ==