To see other variants and accessories, please enter the webcode on our website. webcode 1013 webcode WWXKS008 1 Sampling Scoops, Behr behrotest® sampling scoops for collecting surface samples. Clamping device and rod end are made of stainless steel. These scoops come with vessels made of borosilicate glass and are in accordance with the high standards of DIN EN 1485/AOX procedure. All scoops have the following features: • Rugged, telescoping rod in three pieces • Length adjustable between 1 m and 3.75 m • Ideal for taking samples from bodies of water that are difficult to reach • Continuously adjustable scoop angle • Vessel holder made of stainless steel Article Rod length cm Sample jar Volume l Order No. 1PB 1000 300. 3-piece Special glass 1 39 48 65012 PF 1000 300. 3-piece Conical shoulder bottle 1 39 48 65014 PP 1000 300. 3-piece PP beaker 1 39 48 65015 PT 1000 300. 3-piece PTFE beaker 1 39 48 65016 PV 1000 300. 3-piece Stainless steel scoop 1 39 48 65017 Samplers webcode WWBPE002 2 3 4 5 6 7 Sampling Sticks, ORI Sampling sticks for taking samples by hand Made of very light-weight, stable fibre glass, in signal-yellow colour. Resistant to aggressive waste waters. Thanks to the practical hinged lock, the multi-part telescopic stick is infinitely adjustable. Maximum length available: 3.20 m. With screws for easy removal of one sampling system from the telescopic stick for replacement with another. This means that the sampling stick is fit for universal use. For full functionality, you need at least one stick and one sampling system. Article Order No. Sampling stick, 2-piece, 2.30 m 10 22 50728 Sampling stick, 3-piece, 3.20 m 10 22 50729 2Sampling beaker, PE, 600 ml 10 22 51002 PE beaker with embossed blue scale and spout. With clamp for exchange of beakers, and joint for universal angle adjustment of 0 – 180°. Sampling beaker, PE, 1000 ml 10 22 51005 3Sampling beaker, stainless steel, 600 ml 10 22 51008 Same as 2 but stainless steel beaker with spout, intended specifically for taking microplastic and nanoparticle samples Sampling beaker, stainless steel, 1000 ml 10 22 51009 4Sampling beaker, borosilicate glass, 1000 ml 10 22 51003 Held by a PVC collar, the beaker glass is perfectly protected against glass breakage. Sampling beaker, borosilicate glass, 2000 ml 10 22 51004 5Pendulum beaker, PE, 600 ml 10 22 50730 The beaker swivels in all directions and is suitable for sampling from deep gulleys and pits. Pendulum beaker, PE, 1000 ml 10 22 50731 6Pendulum beaker, stainless steel, 500 ml 10 22 50732 Same as 3, beaker made of stainless steel (suitable for flame treatment) Pendulum beaker, stainless steel, 1000 ml 10 22 50733 7Measuring quiver 10 22 51007 For holding an ISM sensor. By means of the appurtenant electrode in connection with des-Link1) it is possible to measure for example the pH value in larger distances or depth (up to 2.50 m) via smartphone. The stainless steel sieve basket protects the electrode. 1) see page 919 Special Analysis Water, Environment
RkJQdWJsaXNoZXIy MTIxNDc3OQ==