1026 Photometric Workplaces, Field Investigations webcode WWSE2010 Photometers MD 600 and MD 610, Lovibond® Photometers MD 600 and MD 610 The MD 600 and MD 610 give you mobile devices in a modern design with the analytical features of laboratory photometers. All important water analysis parameters from A(luminium) to Z(inc) are covered by these two devices. Reagent tablets, powder reagents, liquid reagents, or cuvette tests (16 mm/13 mm) are used depending on the method. The AquaLX® app, available free of charge, offers the possibility of transferring measurements to smart phones or tablets via Bluetooth® (MD 610). The proven MD 600 photometer uses the classic infrared interface with which data can be transferred by means of the IRiM module to the PC or laptop. • Highest reproducible precision with interference filter • Display with background lighting • More than 120 pre-programmed methods • Automatic selection of wavelength • User guidance in German, English, French, Spanish, Italian, Portuguese (BR), Polish, and Indonesian • Buffer for 1000 (MD 600) or 500 data records (MD 610) • More than 35 user-specific methods possible • Bluetooth® interface for connection to smart phones and tablets (only with MD 610) • iOS® and AndroidTM app for data management and email delivery (only with MD 610) • Infrared interface (only with MD 600) • Waterproof housing (as defined in IP 68, 1 hour at 0.1 meter) • Handheld format, portable Delivery Content: The instrument is supplied complete and ready-to-use incl. 4 batteries, 3 vials Ø 24 mm, 3 vials Ø 16 mm, 1 adapter each for 16 mm and 13 mm vials, stirring rod 13 cm, brush 11 cm, screw driver, guarantee sheet, certificate of compliance, instruction manual, carrying case with water resistance foam, but without reagents. Technical data: Display: Graphic-display Interfaces: Infrared1) (MD 600), Bluetooth® 4.0 (MD 610) RJ45 socket for Internet updates2) Optics: LEDs, interference filters (IF) and photo sensor in transparent sample chamber Wavelength range: 1 = 530 nm IF D l = 5 nm 2 = 560 nm IF D l = 5 nm 3 = 610 nm IF D l = 6 nm 4 = 430 nm IF D l = 5 nm 5 = 580 nm IF D l = 5 nm 6 = 660 nm IF D l = 5 nm IF = interference filter Wavelength accuracy: ± 1 nm Photometric accuracy: 2% FS (T = 20°C – 25°C) tested with standard solutions Photometric resolution: 0.005 A Operation: Acid and solvent resistant, touch-sensitive keypad with audible feedback via integrated beeper Power supply: 4 batteries (Mignon AA/LR6); Operation time approx. 26 h continuous operation or 3500 tests Auto-Off: approx. 20 minutes after last keypress with audible signal Dimensions: approx. 210 × 95 × 45 mm (unit) approx. 395 × 295 × 106 mm (case) Weight (unit): approx. 450 g Ambient conditions: 5 to 40°C at max. 30 to 90% rel. humidity (non condensing) Language selection: German, English, French, Spanish, Italian, Portuguese, Polish,Indonesian; additional languages via Internet update Memory capacity: approx. 1000 data sets (MD 600) / 500 data sets (MD 610) Approval: CE 1) optional available: IRiM (Infrarot Interface Modul) 2) optional available: connection cable with integrated electronics (RS 232/RJ-45-socket) Article Order No. Photometer MD 600 10 77 10600 Photometer MD 610 10 77 10610 Accessories Article Order No. Set of 12 round vials with lid, Height 48 mm, Ø 24 mm 10 77 17620 Set of 10 round vials with lid, Height 90 mm, Ø 16 mm 10 77 17665 Verification Standard Kit 10 77 15640 Cable for update for connection to a PC 10 77 14030 Manufacturer certificate 11 10 77 19770 Special Analysis Water, Environment
RkJQdWJsaXNoZXIy MTIxNDc3OQ==