To see other variants and accessories, please enter the webcode on our website. webcode 1045 ƒesidue Analysis webcode WWSE2023 Dipslides, Lovibond® • Determine aerobic and anaerobic bacteria levels • Early indication of bacteria proliferation • Results in 48 hours • Inexpensive Guidelines to advise on the correct practices to control legionella bacteria in water systems exist worldwide. Suppressing bacteria levels does substantially reduce the possibility of an outbreak of this often fatal disease. Guidelines recommend introducing a monitoring and control program. This program includes the testing of cooling tower waters with dipslides on a regular basis. A full range of dipslides is available for semiquantitative determination of aerobic and anaerobic bacteria populations in industrial and recreational waters. Dipslide accuracy is limited due to the small sample size, but if used correctly and incubated at a constant temperature using the Lovibond® dipslide incubator, they are excellent for trend analysis and can give an early indication of bacteria proliferation. Article Order No. PU pc/Pack D001 TTC/TTC Dipslides 10 77 10110 10 D002 TTC/MALT Dipslides 10 77 10210 10 D003 TTC/RBS Dipslides (Rose Bengal) 10 77 10310 10 D004 TTC/MAC Dipslides (Macconkey) 10 77 10410 10 D005 TTC/Chromogenic Dipslides 10 77 10510 10 D006 Pseudomonas (PDM)/MAC Dipslides 10 77 10611 10 D007 Pseudomonas (PDM)/TTC Dipslides 10 77 10710 10 D008 SRB Tube Test 10 77 10810 10 D009 NRB Tube Test 10 77 10910 10 D011 R2A/R2A Dipslides 10 77 11110 10 webcode WWSE2024 DI 10 Dipslide Incubator, Lovibond® • Robust design • Holds up to 12 dipslides or 10 quanti-discs • Excellent temperature stability • In-car operation The Lovibond® DI 10 Incubator is designed for the reliable incubation of bacteriological slides, on-site, in a laboratory or even while mobile in a car or van. National and European guidelines give practical advice on how to monitor, clean, test and ultimately control harmful legionella bacteria in water systems. Dipslides provide a crucial part in the testing program, but must be used correctly and regularly as part of a planned regime, week on week to be of any meaningful value. The incubation period and the incubation temperature should be the same each time the test is performed so that bacteria growth is controlled and consistent each time the test is performed. This allows for week by week comparisons to be made and high counts easier to identify. Dipslides are usually incubated at 30˚C for 48 hours, but this can vary depending upon the specific application. The Lovibond® DI 10 Incubator, when used in conjunction with dipslides, enables effective microbiological monitoring of cooling water in accordance with the many European guidelines. The DI 10 Incubator is also part of the Lovibond® Marine Test Kit for the monitoring of other potable water contaminants, such as pseudomonas, streptococci coliforms & E.coli, see page 24 for more information. Technical data: Display: 1 × 16 bit backlit LCD Power supply: 12 V / 110 V / 240 V Dimensions: 246 × 215 × 162 mm Weight: 1.7 kg Article Order No. DI 10 Dipslide incubator 10 77 10701 Special Analysis Water, Environment
RkJQdWJsaXNoZXIy MTIxNDc3OQ==