Continued on next page 1078 Safety Cabinets 1 2 Article Order No. 1Safety cabinet S90.196.060.WDAS (without interior) 10 13 13228 Delivery costs depending on place of delivery Interior equipment packages model S90.196.060.WDAS (powder-coated steel plate): • height-adjustable shelfs Recommended configuration: 3 shelfs, perforated plate insert and bottom collecting pan acc. to StawaR Article Order No. 23 Shelves, perforated plate insert, bottom collecting pan acc. to StawaR 10 13 13249 4 Shelves, perforated plate insert, bottom collecting pan acc. to StawaR 10 13 13250 Safety Cabinets, asecos Acid and alkali cabinets with interior fittings Safe and proper storage of aggressive hazardous material. GS-approved, laboratory furniture standard EN 14727. Body made of epoxy resin-coated steel sheet RAL 7035 (light grey), interior made of highly resistant melamine resin-coated special material plates. Circumferential synthetic lip seals prevent noxious fumes from escaping. Two hermetically separated storage compartments, vented separately. Door opening angle more than 90°. Corrosion-resistant, metal-free air channels. Interior largely freely of metal. Shelves: with removable, liquid-proof and highly resistant plastic trays with general buildings supervisory approval (DlBt). Model SL.196.120.MV • 2 folding doors (vertical partition) • Outside dimensions (W × D × H) mm: ca. 1197 × 603 × 1965 Article Order No. 3Model SL.196.120.MV (without interior) 10 13 19120 Delivery costs depending on place of delivery Model SL.196.060.MH • 2 folding doors (horizontal partition) • Outside dimensions (W × D × H) mm: ca. 597 × 603 × 1965 Article Order No. 4Model SL.196.060.MH (without interior) 10 13 19060 Delivery costs depending on place of delivery Interior equipment packages Recommended configuration: 12 tray pull-outs (SL.196.120.MV), 6 tray pull-outs (SL.196.060.MH) Article Width model mm Width × Depth × Height mm Order No. 8 tray pull-outs 1200 407 × 468 × 80 (each drawer) 10 13 13607 512 tray pull-outs 1200 407 × 468 × 80 (each drawer) 10 13 13608 4 tray pull-outs 600 407 × 468 × 80 (each drawer) 10 13 13614 66 tray pull-outs 600 407 × 468 × 80 (each drawer) 10 13 13615 3 5 Typ 90 fire resistant gas cylinder cabinet Gas cylinder cabinets for proper storage, provision, and removal of gas cylinders in work rooms pursuant to TRGS 510 and TRBS 3145. Type-tested fire resistance for a period of 90 minutes pursuant to DIN EN 14470-2 (G90), GS approved. Fire protection insulation with intumescent joint seals. Body made of plastic-coated sheet steel in RAL 7035 (light grey), interior surfaces coated with impact- and scratch-proof synthetics highly resistant to chemicals. Model S90.196.060.WDAS with door-catching device Soft, air-sprung closing behavior of the doors. The entire closing mechanism is outside of the storage space for increased corrosion protection of safety-relevant components. The door-catching device locks the doors for safe transfer in and removal from the cabinet. Safety in case of fire: doors close automatically thanks to the integrated temperature-controlled tripping function. Serial equipment: • 1 folding door (door hinge left) • Door-catching device • Profile cylinder lock (chamber can be integrated in available locking system) • Adjustment aids to balance floor bumps • Integrated air ducts ready for connection (NW 75) to a technical exhaust system • Earth connection • Outer dimensions (W × D × H): ca. 596 × 616 × 1968 mm Interior dimensions (W × D × H) Shelf: 440 × 432 × 30 mm Perforated plate insert: 409 × 474 × 107 mm Bottom collecting pan: 417 × 482 × 127 mm Laboratory Facilities Protective Equipment
RkJQdWJsaXNoZXIy MTIxNDc3OQ==