Continued on next page 292 Tray frame sets Sterilisation boxes Steam Sterilizers 1 2 Accessories Article Order No. Spiral holder 10 60 55210 1 Insertion with lid, side panel with lockable perforation. for Length × Width × Height mm Order No. HMT 230 FA/MA 345 × 183 × 130 10 60 55212 HMT 260 FA/MA/MB 375 × 215 × 135 10 60 55217 HMT 300 MA/MB 500 × 205 × 185 10 60 55239 Baskets for Length × Width × Height mm Order No. HMT 230 FA/MA 340 × 180 × 120 10 60 55236 HMT 260 FA/MA/MB 370 × 220 × 120 10 60 55237 HMT 300 MA/MB 500 × 245 × 160 10 60 55238 2 Consisting of a shelf with trays or grids and tray pulling holder. for Length × Width × Height mm Order No. HMT 230 FA/MA 330 × 225 (max.) × 192 (max.) 10 60 55224 HMT 260 FA/MA/MB 390 × 250 (max.) × 205 (max.) 10 60 55225 HMT 300 MA/MB 550 × 290 (max.) × 245 (max.) 10 60 52054 webcode WWT3F001 Steam Sterilizers, SHP Steriltechnik Steam Sterilizer LABOKLAV 25 The compact table top unit with a huge capacity and the performance of a big autoclave. No feed water or waste water connection required, ven with fast recoolng, just plug it in and start Configuration Basic unit: • 25 l useable chamber volume, table top unit • Chamber size 275 mm diameter and 465 mm length • Up to 5 × 1 l laboratory flasks • Up to 5 kg instruments or waste • Max. permiseable pressure 2.8/-1 bar • Sterilisation temperature 98°C to 135°C • Integrated steam generator • Automatic feed water pump • Motorized quick closing system • Chamber lid made from safety glass with illuminated vision area • Front cover from safety glass with colored illumination (LED) • Thermo locking acc. DIN EN (IEC) 61010-2-40 with flexible media temperature sensor • Fully automated control by up to 10 programmes • All programmes can be individualized and code protected • Integrated feed water tank and condensate tank • RS 485 interface • Internal 4 MB memory chip, stores cycle data of approx. 150 cycles • Validation duct prepared • Heating power 2.0 kW, 230 V Z, 16 A Available options: Fast recooling (air cooling) Vacuum system (single and fractionated pre vacuum, drying vacuum) Combination of cooling and vacuum Technical specifications: Outer dimensions: Dimensions (W×H×D): 440 × 540 × 660 mm Required table space: 440 × 550 mm + 110 mm door overhang Loading: Instrument or waste: max. 5 kg Laboratory flasks, 1 l: max. 5 Pieces Electrical connections: Power connection: 230 V, 50 Hz, 16 A Max. power requirements: 3350 W Average consumtion per cycle: 0.75 kW/h Article Order No. Steam Sterilizer LABOKLAV 25 B 10 16 02510 Basic unit for the sterilisation of liquids, solids and waste Steam Sterilizer LABOKLAV 25 M 10 16 02511 integrated fast cooling system (air cooling) Steam Sterilizer LABOKLAV 25 V 10 16 02514 integrated vacuum system Steam Sterilizer LABOKLAV 25 MV 10 16 02515 vacuum system and fast cooling system Transport, packing, assembly, introduction LABOKLAV 25 (optional) 10 16 02599 Safety, Cleaning, Hygiene Sterilization
RkJQdWJsaXNoZXIy MTIxNDc3OQ==