Catálogo General de Material para Laboratorio

To see other variants and accessories, please enter the webcode on our website. webcode 299 Steam Sterilizers webcode WWQMA003 Mediapreparators, Mediaprep, Systec Media preparators of the Mediaprep-Series for preparation and sterilization of microbiological media. 10 to 120 Liters nominal volume. Designed for preparation and sterilization of agar-containing nutrient media and other sterile liquids, with microprocessor-controlled fully automatic program sequence. The Systec Mediaprep-Series includes stronger heating elements, rapid cooling, magnetic stirring, inner vessel, temperature controlled door lock, dispensing outlet and inlet port for adding additives. Characteristics: • Fully automatic microprocessor control incorporating 12 programs • Sterilization temperature pre-selectable up to 136°C / 3.5 bar • Novel automatic door closure with safety-lock system, lip-gasket out of silicone and opening at the push of a button • Temperature- and pressure dependent interlock for the door, inlet port and dispensing port • Thermal door lock, controlled by pressure and medium temperature according to Pressure Vessel Regulations • Pressure vessel made of stainless steel (AISI 316), electro polished, resistant against chemicals, easy to clean • All sterilization programs with pre-selectable sterilization parameters and automatic program sequence • Rapid cooling with recirculating sterile water, heat exchanger and recirculation pump • Sterilization time activation based on medium temperature • Electronic pressure transducer for pressure and temperature regulation • Autofill - automatic de-mineralized water feed for steam generation • Steam exhaust condensation - water-cooled with thermostatic control • Validation port • Start by clock / timer for programmable start-time • Prepared for subsequent printer connection • RS 232 interface for data transfer • Temperature holding program for keeping agar solutions warm • Base plate for vessels, baskets etc. when used as autoclave • Wheels with stop breaks for portable use • Thermal insulation out of Hanno-Tect, no risk of particle dissociation • Support frame and housing out of stainless steel • Safety pressure release valve • Safety cut off at low water level • Safety cut off at excess temperature • Direct electrical heated through strong heating elements for fast heat-up • Continuous mixing through a stirrer on the bottom of the media-vessel, contact free driven by a strong magnetic motor • Permanent temperature control with a PT-100 temperature load sensor, directly inside the media • Inlet-nozzle with safety screw-closure for filling of additives after sterilization • Media removal through a flexible silicone tubing (either by selectable internal pressure inside the chamber and an electronically controlled pinch valve or with an optional peristaltic pump). Furthermore all filling lines for petri-dishes available on the market or other dispensing devices can be connected, without any exception. The inner filling tube and the dispensing nozzle are sterilized in-line, during the sterilization cycle • Easy cleaning and operational readiness through exchangeable, removable inner vessel. Thereby no risk of cross-contamination between the different batches Type Chamber vol. l Chamber Ø mm Chamber H mm Vol. inner container l Dimensions inner cont. Ø × D mm Outer W × H × D mm Heating cap. kW Order No. Systec Mediaprep-10 17 296 250 12/10 270×222 480×555×635 3.6 10 12 91710 Systec Mediaprep-20 30 296 450 23/20 270×422 715×555×635 9.3 10 12 91720 Systec Mediaprep-30 44 296 650 34/30 270×622 915×555×635 9.3 10 12 91730 Systec Mediaprep-45 65 400 485 51.3/45 380×452 1080×550×780 20.0 10 12 91745 Systec Mediaprep-65 90 400 690 74.5/65 380×657 1210×550×780 20.0 10 12 91765 Systec Mediaprep-90 126 500 610 103.5/90 480×572 1110×650×895 20.0 10 12 91790 Systec Mediaprep-120 162 500 790 136.1/120 480×752 1240×650×895 20.0 10 12 91820 Power supply for Systec Mediaprep-10: 220-240 V, 50/60 Hz, 16 A Power supply for Systec Mediaprep-20 and 30: 380-400 V, 50/60 Hz, 16A Power supply for Systec Mediaprep-45, -65, -90, and -120: 380-400 V, 50/60 Hz, 32 A Modification to other voltage available on request Prices for Systec mediapreparators, options and accessories available on request Safety, Cleaning, Hygiene Sterilization

RkJQdWJsaXNoZXIy MTIxNDc3OQ==