376 Pipette Tips, Accessories webcode WWQED072 1 2 3 5 4 7 6 Pipette Leak Testing Unit (PLT Unit), BRAND Improve process reliability with functional validation of air-displacement pipettes The most frequent cause of inaccuracy in piston-operated pipettes is leakage. This arises from damage either to the seals, pistons, or tip cones. Often not detectable by the naked eye, leaks lead to significant volume errors. The BRAND pipette leak tester (PLT unit) for air displacement pipettes finds even the smallest leaks within seconds. • Limit values for the commercially available single- and multichannel pipettes in the volume range 1 µl to 10 ml are pre-programmed • Testing with and without tips • Test results in seconds • Patented While the PLT unit cannot replace regular gravimetric testing, daily pipette checks can provide a safeguard during the periods between calibrations. Even the smallest leaks are detected! Process reliability for the pipettes is thus significantly improved. Items supplied PLT unit (Pipette Leak Testing Unit) including one adapter each for testing single-chanel air-displacement pipettes with tip (mounted) and without tip, 2 plugs (for instrument validation), 3 replacement PE filters for the pipette adapters, universal AC adapter, quality certificate and operating manual. Article Order No. 1Pipette leak testing unit (PLT unit) 10 49 03970 Accessories Article Order No. 2Pipette adapter single-channel 10 49 03975 for testing single-channel piston-operated pipettes with tips, incl. 1 plug 3Pipette adapter single-channel 10 49 03976 for testing single-channel piston-operated pipettes without tips, incl. 1 plug 4Pipette adapter multi-channel 10 49 03977 for testing multi-channel piston-operated pipettes with and without tips, incl. 4 plugs 5Universal AC adapter 10 49 03979 input: AC 100 V – 240 V, 50/60 Hz output: DC 6.5 V, 800 mA 6Filter for pipette adapter 10 49 03978 Pack of 10 PLTconnect – software for pipette leak test The optional PLT unit software, also called PLTconnect, is a program to facilitate the documentation of leak tests, which are carried out with the PLT unit from BRAND. Measured values from the test result of the PLT unit will be automatically transferred to the program. The result is displayed as a test certificate and stored in the program. Thus, the documentation of your test results will be significantly facilitated. Pack of 1. Article Order No. 7PLTconnect, Software for pipette leak testing unit 10 49 73980 Volumetry Pipettes, Pipetting Aids Use the webcode on our website to see a larger selection of products from a specific manufacturer. webcode
RkJQdWJsaXNoZXIy MTIxNDc3OQ==