Continued on next page 392 Pipetting Aids Micro Pipetting Aid, Hecht-ASSISTENT Micro-pipetting aid (Mikro-Pipex) For pipetting liquids by using disposable micropipettes with a ring mark as well as other pipettes up to approx. 1 ml. Cone Ø max. 5 mm, autoclavable at +121°C. Contaminated disposable micropipettes up to 50 µl can be dropped without touching by means of the integrated releasing device. The pipetting aid may not be used for capillaries calibrated to contain end to end! Article Order No. Micro-Pipex 40558001 19 18 17559 Pipette Controller VITLAB maneus®, VITLAB The VITLAB maneus®pipette controller enables both left- and right-handers to operate all normal bulb and graduated pipettes from 0,1 to 200 ml easily and fatigue-free. Its safe and easy handling allows even inexperienced users to adjust the meniscus precisely. With the new design, unscrewing the adapter enables easy and fast replacement of the hydrophobic membrane filter, which protects the instrument against fluid penetration. The valve system is optimised so that liquids can be drawn up simply, without exerting pressure. The highly sensitive filling and discharge of liquids are controlled gently by the pipetting knob. Thus, the suction element provides rapid filling of the pipette (capacity: 50 ml in less than 10 seconds). The discharge bellows are used for the emptying (blow-out) of the pipette. The specially moulded intake cone ensures secure seating for all normal bulb and graduated pipettes (0.1 to 200 ml). The VITLAB maneus® is simple to dismantle, easy to clean, and completely autoclavable at 121°C (2 bar) according to DIN EN 285. With replacement 3 µm membrane filter and instruction manual. Article Order No. Pipette controller VITLAB maneus® 10 85 30500 webcode WWQED010 Pipette Controllers accu-jet® pro, BRAND All with one hand: Select the delivery mode (gravity delivery/blow-out) and adjust the pipetting speed using the sensitive pipetting buttons - a great benefit when using small-volume pipettes. Ergonomic handgrip, weight only 190 g, perfectly balanced design - for fatigue-free pipetting even in prolonged operations. the accu-jet®pro is supplied with two battery compartment covers. The second cover enables you to place the instrument inverted on the bench, to avoid contamination of the pipette adapter. • Ergonomic design • Infinitely variable control of the maximum pipetting speed • Rugged, powerful pump for fast filling (50 ml in 10 seconds) • A flashing recharching indicator LED alerts you that the battery is running low. You can work for another two hours before its empty • 8 hours continuous pipetting with a 10 ml pipette without recharging • Corrosion protection through active pressure compensation • A hydrophobic membrane filter and a built-in check valve protect against liquid penetrating inside • Two modes: gravity delivery or motor-powered blow-out • For glass and plastic pipettes from 0.1 – 200 ml accu-jet® pro pipette controllers Complete with wall support, 2 spare membrane filters (0.2 µl), sterile, nickel-metal hydride battery pack, 2 battery compartment covers, operating manual, AC adapter (100-240 V; 50-60 Hz) Type With charger for Europe (Continent) With charger for UK/Ireland Order No. Order No. accu-jet® pro, dark blue 27 49 26300 27 49 26310 accu-jet® pro, magenta 27 49 26301 27 49 26311 accu-jet® pro, green 27 49 26302 27 49 26312 accu-jet® pro, royal blue 27 49 26303 27 49 26313 1 Volumetry Pipettes, Pipetting Aids
RkJQdWJsaXNoZXIy MTIxNDc3OQ==