To see other variants and accessories, please enter the webcode on our website. webcode 409 Graduated Cylinders 1 Graduated Cylinders, PP, Class B, VITLAB 1Graduated cylinders with embossed blue graduations Highly transparent. With easily readable, raised, embossed blue scale and ring mark at the primary scale points. Calibrated “In”. Class B tolerances according to DIN 12681/ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. To preserve markings. do not clean at temperatures exceeding 60°C. Suitable for contact with foodstuffs according to ordinance (EU) No. 10/2011. Vol. ml Tol. ± ml Grad. ml Height mm Ø mm Order No. PU pc/Pack 10 0.2 0.20 145 15 23 85 10159 12 25 0.5 0.50 170 22 23 85 10168 12 50 1.0 1.00 200 27 23 85 10175 12 100 1.0 1.00 250 33 23 85 10178 12 250 2.0 2.00 315 44 23 85 10184 6 500 5.0 5.00 360 58 23 85 10188 6 1000 10.0 10.00 440 69 23 85 10192 6 2000 20.0 20.00 482 97 23 85 10196 3 Vol. ml Tol. ± ml Grad. ml Height mm Ø mm Order No. PU pc/Pack 10 0.2 0.20 145 15 10 85 31159 12 25 0.5 0.50 170 22 10 85 31168 12 50 1.0 1.00 200 27 10 85 31175 12 100 1.0 1.00 250 33 10 85 31178 12 250 2.0 2.00 315 44 10 85 31184 6 500 5.0 5.00 360 58 10 85 31188 6 1000 10.0 10.00 440 69 10 85 31192 6 2000 20.0 20.00 482 97 10 85 31196 3 2Graduated cylinders with embossed graduations Highly transparent. With a raised scale and ring mark at the primary scale points calibrated “In”. Class B tolerances according to DIN 12681/ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80°C does not cause tolerance limits to be permanently exceeded. Suitable for contact with foodstuffs according to ordinance (EU) No. 10/2011. 2 Graduated Cylinders, PMP, DE-M, Class A, VITLAB Highly transparent. DE-M marked. With a raised scale and ring mark at the primary scale points, calibrated “In”. The lot certificate supplied bears the batch number and the actual nominal value ascertained under the test conditions. The resulting deviations from the nominal value fall well under the allowed tolerances of Class A according to DIN 12681 and ISO 6706. With the laser engraved batch number and the year of manufacture. Hexagonal base with bottom studs provides high stability. Thermal stress up to 121°C (autoclaving) does not cause tolerance limits to be permanently exceeded. Autoclavable at 121°C (2 bar) according to DIN EN 285. Also available with DAkkS calibration certificate or individual certificate. Vol. ml Tol. ± ml Grad. ml Height mm Ø mm Order No. PU pc/Pack 10 0.10 0.20 145 15 10 85 34604 2 25 0.25 0.50 170 22 23 85 64768 2 50 0.50 1.00 200 27 23 85 64875 2 100 0.50 1.00 250 33 23 85 64978 2 250 1.0 2.00 315 44 23 85 65084 2 500 2.5 5.00 360 58 23 85 65188 1 1000 5.0 10.00 440 69 23 85 65292 1 2000 10.0 20.00 482 97 23 85 65396 1 ‼ Available only in original packaging units. No fractions possible. Volumetry Graduated Vessels
RkJQdWJsaXNoZXIy MTIxNDc3OQ==