To see other variants and accessories, please enter the webcode on our website. webcode 47 Bottles Article Order No. PU pc/Pack DURAN PURE Screw Cap GL 45, with lip seal 10 21 12892 5 26 mm high, for DURAN® laboratory glass bottles webcode WWEQ2187 Tamper-Evident Screw Cap, DURAN Group / IDL Tamper-Evident Closure made of PP for DURAN® laboratory glass bottles The tamper-evident closure, made of PP, can be used with all DURAN® labglass bottles with thread GL 45. It is used for safety storing the bottle contents. The cap is screwed tightly to the bottle and after a soft ”click“ the plastic ring is fixed on the bottle neck. When the cap is opened for the first time, the perforation of the plastic ring is broken thus showing that the bottle has been opened. The cap is autoclavable and temperature resistant up to +140°C. After the perforation of the plastic ring is broken, the cap may of course still be used as an ”ordinary“ screw cap. Colour Thread GL Ø mm Height mm Order No. PU pc/Pack blue/red1) 45 54 26 11 29 17526 10 blue/yellow2) 45 54 26 10 21 15886 10 ‼ Available only in original packaging units. No fractions possible. 1) With lip seal 2) With PTFE protected seal webcode WWEQ2040 Pouring Rings made of ETFE, DURAN Group / IDL ETFE pouring rings, temperature resistant up to +180°C, autoclavable. for thread GL Colour Order No. PU pc/Pack 32 red 11 29 24419 10 45 red 11 29 24428 10 ‼ Available only in original packaging units. No fractions possible. webcode WWEQ2038 Pouring Rings, DURAN Group / IDL PP pouring rings, autoclavable up to +140°C steam. Thread GL Colour Order No. PU pc/Pack 32 blue 11 29 24219 10 45 blue 11 29 24228 10 45 yellow 11 29 89917 10 45 green 11 29 89911 10 45 gray 11 29 89914 10 ‼ Available only in original packaging units. No fractions possible. webcode WWEQ2193 HPLC Bottles GL 45, DURAN®, DURAN Group / IDL Convenient complete system for the transfer of liquid media. Consists of 4-port screw cap (PP), four screw connections (black, M8 thread), silicone seals and DURAN® Pressure Plus bottle. The bottle is pressure-resistant in the range from -1 to +1.5 bar (TÜV-certified with GS-sticker). The cap has 4 connections, so-called ports. Outer tube diameters of 1.6, 3.0, 3.2 mm can be used. An optional pressure compensation via a sterile membrane filter (0.2 µm) is possible. Unused ports can be sealed with silicone blanking seals. The cap is completely autoclavable. Tmax = 140°C. The system is suitable for application in the field of HPLC or bio-technology and each process which requires a media transfer. Article Order No. PU pc/Pack HPLC bottle, GL 45, 500 ml 10 21 19821 2 HPLC bottle, GL 45, 1000 ml 10 21 19820 2 Screw cap GL 45, 4 ports complete 10 21 19812 2 GL45 screw cap, 4 × M8 screw connections, 12 × silicone seals Spare part set for HPLC screw cap 10 21 19813 1 Including silicone seals Pressure equalization set (0.2 µm) 10 21 17801 1 Spare membrane filter 10 21 19819 2 ‼ Available only in original packaging units. No fractions possible. Containers Bottles, Carboys, Canisters, Jars, Accessories
RkJQdWJsaXNoZXIy MTIxNDc3OQ==