To see other variants and accessories, please enter the webcode on our website. webcode 481 • 4 Vacuum controller bench-top device or for lab scaffold CVC 3000 detect The VACUU·SELECT complete controller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control. Technical data: Measuring range: 1080/810 – 0.1/0.1 mbar/hPa/torr Measurement principle: Ceramic diaphragm (alumina), capacitive, gas indep., absolute pressure Measurement uncertainty: < ±1 mbar/hPa/torr / ±1 digit (after adjustment, constant temp.) Vacuum connection: Hose nozzle DN 6/10 mm Venting valve connection: Integrated, hose nozzle DN 4–5 mm Dimensions (L×W×H): 191 × 127 × 187 mm Weight: 2 kg Power supply: 100 - 230 V / ~ 50 - 60 Hz Article Order No. 4VACUU·SELECT Complete controller benchtop device 10 18 70070 CEE/CH/UK/US/AUS/CN Items supplied: VACUU·SELECT complete controller benchtop device, with solenoid valve, non-return valve, integrated ceramic diaphragm vacuum sensor and venting valve. With power supply, ready to use, with manual. VACUU·SELECT Complete controller for scaffold mounting 10 18 70080 CEE/CH/UK/US/AUS/CN Items supplied: VACUU·SELECT complete controller for lab scaffold mounting, with solenoid valve, non-return valve, integrated ceramic diaphragm vacuum sensor and venting valve. With power supply, ready to use, with manual. webcode WWQVD019 6 5 Vacuum Gauges, Rettberg Article Order No. 5Vacuum manometer 39 70 10000 With 2 scale ranges (1000-0 mbar/ 760-0 mmHg) complete with adapter to standard ground cone 29/32, suitable for work in the rough vacuum range. Article Order No. 6Vacuum manometer digital 10 70 00004 Digital vacuum gauge on special lock with thick cone NS29/32, with digital display of the pressure (in bar / psi / MPa), storage of minimum and maximum value, barograph with drag indicator function, battery operated with display of status of battery charging. 4-digit display: -1 to +2 bar Accuracy: 0.5% Protection: IP 65 Use the webcode on our website to see a larger selection of products from a specific manufacturer. webcode
RkJQdWJsaXNoZXIy MTIxNDc3OQ==