494 Samplers webcode WWR4Q049 1 ProfiSampler, BÜRKLE Vacuum-Sampler for solvents and flammable liquids. Purpose of use Sampling liquids from barrels, tanks, trucks, railway-car, ships, waters, groundwater. • Available with optimised, straight suction tubes for easier sampling. • Transport tubular for organised transport and discard. • Filling level control, reflux automatics and overflow protection by means of the integrated venting valve. • Optimised suction volume 200 ml, suction force of 0.5 bar and suction depth up to 5 m/ water. ProfiSampler Aluminum for solvents and flammable liquids Explosion Categories IIA, IIB and IIC*. With bottle thread GL 45 (in compliance with Schott-glass bottles 100 ml to 1000 ml). During sampling of flammable liquids, the device has to be grounded. Included: Vacuum pump made of aluminium, with feet, venting valve and bottle thread GL 45 with glass bottle 500 ml, 5 suction tubes PA black, 220 cm long, electrically conductive, hose cutter, brass hose weight, 20 seal-it bottle seals, earthing cable *) Please note chemical resistance of the parts in contact with medium. Wear protective clothing! Article Order No. 1ProfiSampler aluminium 10 04 55110 Suction tube PA black, 220 cm long, electrical conductive, pack of 10 pcs. 10 04 51024 BOLA Sampling Pumps, Bohlender Made of polypropylene and PTFE. A pull on the ball handle produces a slight vacuum in the sampling bottle. Due to this vacuum, the sample is sucked into the sampling bottle. All glass bottles with a GL 45 thread can be used as sampling bottles. The pump provides universal chemical resistance since the sample is only exposed to PTFE. • compact construction • usable anywhere (no power or air supply needed) • easy handling • quick and low-risk pumping of ultrapure liquids • volume per stroke 50 ml • for tubing O.D. 6 mm For pumping liquids from sources that are not easily accessible; also suitable for liquids with a high viscosity, e.g. oils Technical data: Material: PTFE and PP Temperature resistance: from -10°C to +90°C Chemical resistance: +++ very good Connection thread GL for bottle volume ml Order No. 18 100 – 2000 10 17 62416 webcode WWR4Q064 Stainless Steel Scoop, BÜRKLE In contrast to conventional scoops, the stainless steel scoops has no openings, undercuts or crevices in which residues could collect. Pore-free finishing produced by high-quality laser welding seams. The stainless steel scoop can be flame-sterilised and can therefore be made completely germ-free. • Scoop made of stainless steel V2A (1.4301), complete with rod • Sterilisable by flame sterilisation or steam sterilisation Article Overall length cm Volume ml Order No. Stainless steel scoop 115 1000 10 04 55410 Sample Preparation Sampling
RkJQdWJsaXNoZXIy MTIxNDc3OQ==