To see other variants and accessories, please enter the webcode on our website. webcode 499 Dispersers 4 Vessel holders and safety positioning rings Vessel holder for fixing any mixing/processing tank. Suitable for the safety-stand incl. boss head. The safety ring avoids any uncontrolled downwards movement of the drive unit. Can also be used to fix the working height. Article Order No. Vessel holder with guide for ST-P20/600 10 74 04511 Safety positioning ring for ST-P20/600 10 74 04531 Stand disperser POLYTRON® PT 10-35 GT - Eco Line 4 Budget dispersing system for operating volumes of up to 10 litres. This powerful disperser is used in sample preparation, formulation, or scale-up tests. Select from up to 30 different dispersing aggregates in a wide range of geometries, designs, materials, and coatings. The electronic control system continuously compares the preselected to the actual speed and adjusts it automatically, e.g. if the viscosity changes. Overview: • Aggregate tip speed up to approx. 34 m/s • Soft start (e.g. with preselected speed, prevents sloshing of the sample) • Thermal fuse (PTC) in case of overload, blocking protection and acoustic alarm • Stable motor speeds even during changes of viscosity • Aggregate change by means of single-hand quick coupling (type F) • Noise-insulated casing • Wide choice of aggregates with EasyClean function Article Order No. POLYTRON® PT 10-35 GT, 230 V (with EU-plug) 10 74 01104 Dispersing units for POLYTRON® PT 10-35 GT Article Working vol. with water ml Order No. PT-DA 05/2EC-F078 0.1 – 5 10 74 03297 PT-DA 07/BEC-F101 (BIOTRONA®) 0.3 – 10 10 74 03355 PT-DA 07/2EC-F101 0.3 – 10 10 74 03298 PT-DA 12/2EC-F154 2.0 – 250 10 74 03299 PT-DA 12/2MEC-F154 2.0 – 250 10 74 03300 PT-DA 12/2WEC-F154 2.0 – 250 10 74 03301 PT-DA 12/BEC-F154 (BIOTRONA®) 2.0 – 250 10 74 03354 PT-DA 20/2EC-F193 100 – 2500 10 74 03302 PT-DA 20/2MEC-F193 100 – 2500 10 74 03303 PT-DA 20/2WEC-F193 100 – 2500 10 74 03304 PT-DA 20/BEC-F193 (BIOTRONA®) 100 – 2500 10 74 03296 PT-DA 30/2EC-F250 100 – 4000 10 74 03305 PT-DA 30/2MEC-F250 100 – 4000 10 74 03307 PT-DA 30/2WEC-F250 100 – 4000 10 74 03309 PT-DA 30/4EC-F250 100 – 4000 10 74 03311 PT-DA 30/DS-F250 (Dissolver) 100 – 4000 10 74 03344 PT-DA 36/2EC-F250 200 – 4500 10 74 03313 PT-DA 36/BEC-F250 (BIOTRONA®) 200 – 4500 10 74 03314 PT-DA 36/2MEC-F250 200 – 4500 10 74 03315 PT-DA 36/4EC-F250 200 – 4500 10 74 03317 PT-DA 36/2WEC-F250 200 – 4500 10 74 03319 Stand for PT 10-35 GT ST-P10/600: Plate stand with one rod design. The plate stand allows for easy and safe height adjustment of the drive. The drive is safely attached to the stand and protected against rotating around the extension by means of a new type of boss head clamp/drive extension with an easy-to-use knurled screw. Article Order No. Electrical stand ST-P 14/590+500, for PT 3100D/PT 6100 D 10 74 00033 Electrical plate stand ST-P 14/590+500 with a telescope bar for more operator comfort. Including Up/Down button and anti-skid mat. The electronic system is designed for environmental temperatures of +5 °C to +40°C and was tested pursuant to EN 60335-1 and UL 962. To be used with POLYTRON® PT 2500 E, PT 10-35 GT, PT 3100 D and PT 6100 D. 230 V (with EU connector) Reduced arm 10 74 03602 for use of the PT 10-35 GT with the electrical stand Plate stand ST-P10/600 10 74 04050 Vessel holder for ST-P10/600 10 74 04513 Safety positioning ring for ST-P10/600 10 74 04535 Sample Preparation Size Reduction
RkJQdWJsaXNoZXIy MTIxNDc3OQ==