Continued on next page 514 Accessories for Variable Speed Rotor Mill PULVERISETTE 14 classic line Universal Grinders, Analytical Grinders, Cutting Mills 1 1 Article Order No. Impact rotor with 8 ribs, stainless steel 10 98 08010 Impact rotor with 12 ribs, stainless steel 10 98 02010 Impact rotor with 24 ribs, stainless steel 10 98 04010 Sieve ring, trapezoidal perforation 0.08 mm, stainless steel 316L 10 98 00010 Sieve ring, trapezoidal perforation 0.12 mm, stainless steel 316L 10 98 01010 Sieve ring, trapezoidal perforation 0.2 mm, stainless steel 316L 10 98 00201 Sieve ring, trapezoidal perforation 0.5 mm, stainless steel 316L 10 98 05010 Sieve ring, trapezoidal perforation 0.75 mm, stainless steel 316L 10 98 08011 Sieve ring, trapezoidal perforation 1 mm, stainless steel 316L 10 98 01011 Sieve ring, trapezoidal perforation 1.5 mm, stainless steel 316L 10 98 05011 Sieve ring, trapezoidal perforation 2 mm, stainless steel 316L 10 98 02001 Sieve ring, square perforation 2 mm, stainless steel 316L 10 98 02011 Sieve ring, square perforation 4 mm, stainless steel 316L 10 98 04011 Sieve ring, square perforation 6 mm, stainless steel 316L 10 98 06011 Conversion kit for large quantities 10 98 01000 Vibratory feeder LABORETTE 24 for continuous feeding 10 98 03000 Stand for vibratory feeder LABORETTE 24 10 98 01001 Rotors and sieve rings are also available in others designs and materials. An extensive range of accessories with impact bar, pin insert, sample exhaustion with Cyclone separators and much more is available for your specific application. 2 3 Ultra Centrifugal Mill, RETSCH Type ZM 200 Application: Gentle, very quick fine milling of soft to medium-hard and thready materials. Ideal e.g. for chemicals, feeding stuff, food, detergent, plastics, fertilisers and pharmaceutical raw and finished products. The ZM 200 is also suitable for cold milling. Features: • Milling gently to material due to two-level rotor-ring sieve system • Powerdrive drive provides better performance with stronger moment of force, also in capacity peaks • Wide revolutions range, adjustable from 6000 to 18000 min -1 • Graphic performance display • Convenient parameter setting via display and ergonomic one-button operation • For sample amounts of a few grams up to 5 litres • Safety plastic housing with automatic lid closing • Electronic safety and diagnostics system • Universally applicable thanks to wide range of accessories Included: Ultra-centrifugal mill with cassette 900 ml. Please order rotor and ring sieves separately. Technical data: Input grain size: up to 10 mm Final grain size: approx. 40 µm Throughput/batch: 300 ml resp. 4500 ml (with cyclone) (depending on product properties and process parameters) Dimensions (W × H × D): 410 × 515 × 365 Weight: approx. 38 kg Power supply: 230 V / 50-60 Hz Article Order No. 2Ultra centrifugal mill ZM 200 53 29 30001 Accessories for ZM 200 Article Order No. Plug-on rotor, rust-proof steel, 6 teeth 53 29 80040 Plug-on rotor, rust-proof steel, 12 teeth 53 29 80041 Plug-on rotor, rust-proof steel, 24 teeth 53 29 80042 Ring sieves 3 Trapezoidal hole mm Order No. Trapezoidal hole mm Round hole mm Order No. 0.08 53 29 70231 1.50 53 29 70238 0.12 53 29 70232 2.00 53 29 70239 0.20 53 29 70233 3.00 53 29 70240 0.25 53 29 70234 4.00 53 29 70241 0.50 53 29 70235 5.00 53 29 70242 0.75 53 29 70236 6.00 53 29 70243 1.00 53 29 70237 Ring sieves with reinforced rim or wear-resistant coating on request. Rotors, ring sieves and cassette for grinding without heavy-metal contamination on request. Sample Preparation Size Reduction
RkJQdWJsaXNoZXIy MTIxNDc3OQ==