Continued on next page 540 Incubators, Cooled Incubators webcode WW91A005 1 2 Cooled Incubators / Storage Cooled Incubators, Memmert Series ICP / ICPeco compressor cooled with TwinDISPLAY (a detailed description of the model variant can be found on page 531) The compressor-cooled incubators with the unique ControlCOCKPIT for quick and intuitive operation. Ideal for temperatures around the freezing point and below. For quick, precise change from heating to cooling phases in ramp operation. Low-noise! Turbulence-free internal air-ventilation, separation of the thermal jacket from the interior prevents the occurrence of drying out the loads through the cooling-device. Highly efficient automatic defrosting system. Segment-dependent control of the internal air-ventilation in 10% steps (from 10 to 100%). 2 stainless steel grids are supplied. Series IPP (SingleDISPLAY) and IPPplus (TwinDISPLAY) Peltier-cooled (a detailed description of the two model variants can be found on page 531) The cooled incubators with the unique ControlCOCKPIT for quick and intuitive operation. With Peltier technology for transition-free heating and cooling within a single system. Environmentally compatible, low energy consumption. Low vibration and nearly noiseless. Forced ventilation by Peltier fan. Energy-saving, refrigerant-free Peltier heating/cooling system (heat-pump principle). 1 stainless steel grid each is supplied with the model sizes 30 and 55; on models of sizes 110 to 750 there are 2 stainless steel grids. Series IPS Peltier-cooled with SingleDISPLAY(a detailed description of the model variant can be found on page 531) Sample storage, incubation and cooling in the food industry, medicine, cosmetics industry or pharmacy: The storage cooled incubators with Peltier elements heat and cool seamlessly in one system. Forced ventilation by Peltier fan. Energy-saving, refrigerant-free Peltier heating/cooling system (heat-pump principle). 2 stainless steel grids are comprised in the delivery. Technical Data: Type series ICP/ ICPeco Work temperature range: -12°C up to +60°C Not suitable for permanent storage at minus temperatures. In case of permanent operation, icing of the glass door may occur. Set temperature range: -12°C up to +60°C Setting accuracy: 0.1°C Power supply: 230 V, 50 Hz (other voltages on request) Type series IPP/ IPPplus Work temperature range without light: 0°C (at least 20°C below room temperature) up to +70°C Arbeitstemperaturbereich mit Licht: +10°C up to +40°C Set temperature range: 0°C up to +70°C Setting accuracy: 0.1°C Power supply: 230 V, 50/60 Hz (other voltages on request) Type series IPS Work/set temperature range: +14°C up to +45°C Setting accuracy: 0.1°C Power supply: 230 V, 50/60 Hz (other voltages on request) Series ICP/ICPeco Type Outer W×H×D mm Inner W×H×D mm Vol. approx. l Wght approx. kg P rating approx. W Order No. ICP110 745×1233×584 560×480×400 108 113 1200 10 26 01101 ICP260 824×1552×684 640×800×500 256 157 1200 10 26 02602 ICP450 1224×1467×784 1040×720×600 449 217 1200 10 26 04501 1ICP750 1224×1950×784 1040×1200×600 749 249 1200 10 26 07501 ICP110eco 745×1233×584 560×480×400 108 113 1200 10 26 01106 ICP260eco 824×1552×684 640×800×500 256 157 1200 10 26 02606 ICP450eco 1224×1467×784 1040×720×600 449 217 1200 10 26 04506 ICP750eco 1224×1950×784 1040×1200×600 749 249 1200 10 26 07506 External dimensions: depth without door handle, depth of door handle 56 mm Interior: depth less 33 mm for the fan Heating Units, Refrigerating Units Temperature Controllers
RkJQdWJsaXNoZXIy MTIxNDc3OQ==