552 Climatic Chambers, Test Chambers webcode WW91A007 1 Humidity Chambers, Memmert Ramp programming for temperature and humidity, active humidity control, and the precise temperature regulation provide for a controlled, physiologically ideal environment for the simulation of real conditions. Suitable for a wide range of applications from building physics over corrosion tests to biological research. Humidity chamber HCP with TwinDISPLAY (a detailed description of the model variant can be found on page 531) This climate chamber offers the full range of comfort, reliability and safety. Thanks to active humidity control from 20% to 95% rh and unsurpassed homogeneity of temperature and humidity over the entire interior, it is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78. The active humidity control ensures an ideal homogeneity of temperature and humidity as well as short recovery times after opening the door in this attractively priced and practically maintenance-free climate chamber. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure. Technical Data: Work temperature range: at least 7°C above room temperature to +90°C Set temperature range: +18°C to +90°C Setting accuracy: 0.1°C Setting range active humidity: 20% rh to 95% rh and rh-Off Setting accuracy active humidity: 0.5% rh Power supply: 230 V / 115 V, 50/60 Hz Type Outer W×H×D mm Inner W×H×D mm Vol. approx. l Wght kg P rating approx. W Order No. HCP50 559×795×521 400×425×330 56 55 230 V: 1520 W 10 26 00508 1HCP105 719×850×591 560×480×400 107 75 230 V: 1720 W 10 26 01058 HCP150 719×1070×591 560×700×400 156 90 230 V: 1800 W 10 26 01508 HCP240 759×1180×691 600×810×500 241 110 230 V: 1840 W 10 26 02408 External dimensions: Depth without door handle, depth of door handle 38 mm. Inner dimensions: Depth is reduced by 25 mm for the fan. Stainless steel shelves, perforated Standard version: size 50: 1 piece, sizes 105 to 240: 2 pieces for type Qty max. Order No. for type Qty max. Order No. 50 5 10 26 00158 240 12 10 26 05158 105/150 6/10 10 26 07418 Stainless steel grids for type Qty max. Order No. for type Qty max. Order No. 50 5 10 26 03118 240 12 10 26 05118 105/150 6/10 10 26 04118 An extensive selection of accessories and options is available on request. We reserve the right to make changes in technical specifications. Dimensions subject to confirmation. All performance data are typical mean values for serial devices. webcode WWQGZ001 2 Constant Climate Chambers, BINDER The BINDER constant climate chambers for long-term stable temperature/humidity/light simulation in one chamber. They are ideal for norm-compliant work according to ICH guidelines and work independent of water supply. Equipment: • Electronically controlled APT.line™ preheating chamber with cooling system • Intuitive touchscreen controller • Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarm • Access port with silicone plug Ø 30 mm, left side • Ethernet interface for communication software APT-COM™ DataControlSystem Series KBF Constant climatic chambers with large temperature and moisture range, temperature range: 0°C to 70°C, moisture range: 10% rel. moisture to 80% rel. moisture Type Interior vol. l Outer W×H×D mm Inner W×H×D mm Order No. KBF 115 102 880×1050×650 600×483×351 41 40 20093 2KBF 240 247 925×1460×800 650×785×485 10 40 10105 KBF 720 700 1250×1925×890 973×1250×576 41 40 20096 KBF 1020 1020 1250×1925×1145 976×1250×836 10 40 10326 Heating Units, Refrigerating Units Temperature Controllers
RkJQdWJsaXNoZXIy MTIxNDc3OQ==