Continued on next page 564 Heating Plates, Multipurpose Baths 1 2 Laboratory Heating Bath, Juchheim 1Laboratory heating bath HB 1500 The HB 1500 heating bath is designed for many different applications. Water, oils or sand can be used as bath filling. 3 different sizes are available. State-of-the art temperature controller with microprocessor included. Features include a measurement circuit monitor for measurement range violations, sensor/cable short-circuiting and sensor/cable breakage. There is absolutely no maintenance required. • Microprocessor controller with 4-digit 7-segment display, 10 mm high, green • Freely parameterizable • With self-optimizing temperature control function • Measurement and control range +0.0 to +250.0°C • Heating power adjustable from 1 to 99% • Overtemperature switch-off at >10K + nominal value • Non-wearing internal sensor on bath bottom • ON/OFF switch, 2-pole, green, illuminated • Can be switched over to an external sensor • Material of bath and housing: stainless steel; front and rear: anodized aluminium Technical data: Bath volume (litres): 2 4 8 Bath size Ø/H: 200/130 mm 240/150 mm 280/180 mm Dimensions (W×D×H): 290×270×275 mm 360×290×275 mm 370×320×285 mm Heating power: 1500 W 2000 W 2000 W Weight: 5.8 kg 6.5 kg 7.5 kg Power supply: 230 V/50 Hz 230 V/50 Hz 230 V/50 Hz Article Order No. Laboratory heating bath HB 1500 2 L 43 57 15003 Laboratory heating bath HB 1500 4 L 43 57 15002 Laboratory heating bath HB 1500 8 L 43 57 15001 2Laboratory heating bath HB 1500/S Equipment identical with HB 1500, plus safety temperature limiter via a separate microprocessor control and an internal temperature sensor. All-pole disconnection of the heating if the safety temperature is exceeded. Overtemperature switch-off at >10K + nominal value is not applicable in this version. Article Order No. Laboratory heating bath 1500/S 2 L 43 57 15013 Laboratory heating bath 1500/S 4 L 43 57 15012 Laboratory heating bath 1500/S 8 L 43 57 15011 3 Hot Plates, Gestigkeit Electrical hot plates with variable temperature control, with or without a thermostatic regulator. Robust construction for continuous performance. Aluminium alloy hotplate. Asymmetrical heating system (hotplate corners and edges are subjected to more heat) ensure an even temperature over the entire heating surface. Asbestos-free insulation. The housing is constructed from high-grade, stainless steel No. 1.4301, whereby the central section has been additionally sprayed in orange. Four adjustable feet ensure extra stability. Connecting cable 1,75 m. long. At 230 V~ up to 3200 W with earthing pin plug. Hot plates with infinitely variable control Type A mm B mm C mm D mm P rating W Voltage V Temp. °C Wght kg Order No. HD0 300 300 312 312 1800 230 370 10 43 06 00120 HD1 350 350 358 358 2200 230 370 12 43 06 00121 HE1 290 440 308 458 2400 230 370 14 43 06 00131 HD2 350 500 364 514 2850 230 370 19 43 06 00122 HD3-230 430 580 442 592 4000 230 370 25 43 06 00123 HD3-400 430 580 442 592 4000 3×400 370 25 43 06 00140 Hot plates with thermostatic control and power controller from 10 to 100 W-% Type A mm B mm C mm D mm P rating W Voltage V Temp. °C Wght kg Order No. HT01 300 300 312 312 1000 230 30 – 110 11 43 06 01101 3HT02 300 300 312 312 1800 230 50 – 300 11 43 06 01102 HT03 300 300 312 312 1800 230 100 – 370 11 43 06 01103 HT11 350 350 358 358 1150 230 30 – 110 13 43 06 01111 HT12 350 350 358 358 2200 230 50 – 300 13 43 06 01112 HT13 350 350 358 358 2200 230 100 – 370 13 43 06 01113 TH11 290 440 308 458 1650 230 30 – 110 14 43 06 01211 Heating Units, Refrigerating Units Temperature Controllers
RkJQdWJsaXNoZXIy MTIxNDc3OQ==