To see other variants and accessories, please enter the webcode on our website. webcode 565 Heating Plates, Multipurpose Baths Please note: The range 30 to 110°C is not suitable for cooking purposes. 1 2 3 Hot Plates made of CERAN 500®, Gestigkeit High-duty hot plates made of CERAN®with thermostatic temperature control from +50 to 500°C CERAN® - an extraordinary glass ceramic which is extremely resistant to breakage and changes of temperature, will not distort, infrared transmitting and also hight acid-resistant. Its popularity as a material for hot plates in increasing continually. Features: The low-mass plate is electrically heated over its full surface, and is embedded into a high-grade, stainless steel frame which is mounted on an internally insulated stainless steel housing. The housing is 5 mm bigger all-round than the Ceran plate. Four feet, which can be individually adjusted to an approximate height of 8 mm, ensure wobble-free standing. The overall height when the feet are screwed right in amounts to 98 mm. Types 4 A and 4 SR are equipped with additional sockets for 4 screw-in retort rods with a diameter of 12 mm. The entire temperature control system is accommodated in a sealed pressure-cast aluminium case with IP 65 protection. The temperature is set on a °C temperature scale from +50 to 500°C and remains constant automatically. Very good control accuracy, e.g. ± 4°C at 100°C to ±2°C at up to 300°C an more, are achieved thanks to the low-mass heating system and fast responding temperature sensor. These small differences are hardly notable in the heated material. Heat up times are very short, e.g. just 8 minutes to 500°C. Series A - Bench-top units with attached control case Type Platform size mm Wght kg P rating W Voltage V Order No. 14 A 430×140 5 1500 230 43 06 05004 11 A 280×280 5.5 2000 230 43 06 05011 222 A 280×430 7 3000 230 43 06 05022 33 A 430×430 9 4400 3×400 43 06 05033 44 A 430×580 11.5 5700 3×400 43 06 05044 Series SR - Units with a separate control case for wall mounting Type Platform size mm Wght kg P rating W Voltage V Order No. 4 SR 430×140 5 1500 230 43 06 05204 11 SR 280×280 5.5 2000 230 43 06 05211 322 SR 280×430 7 3000 230 43 06 05222 33 SR 430×430 9 4400 3×400 43 06 05233 44 SR 430×580 11.5 5700 3×400 43 06 05244 The standard length of the cable between the control case and the heater is 1.3 m. Each additional 0.5 m incurs an extra charge equal to 1% of the unit’s price. Please quote required cable length when ordering. 4Series EB-C - Flush-mounting units for installing in benches Type Platform size mm Heating area mm Height approx. mm P rating W Voltage V Order No. 11 EB-C 350×350 260×260 120 2000 230 10 06 05311 22 EB-C 500×350 410×260 120 3000 230 10 06 05322 33 EB-C 500×500 410×410 120 4400 3×400 10 06 05333 44 EB-C 650×500 560×410 120 5700 3×400 10 06 05344 Hot plate as flush-mounting unit for installing in benches. Separate controller case for installing behind the bench frame. The standard length of the cable between the hot plate and the controller case is 0.65 m. For more technical specifications go to www.gestigkeit.de. 4 Type A mm B mm C mm D mm P rating W Voltage V Temp. °C Wght kg Order No. TH12 290 440 308 458 2400 230 50 – 300 14 43 06 01212 TH13 290 440 308 458 2400 230 100 – 370 14 43 06 01213 HT21 350 500 364 514 1800 230 30 – 110 19 43 06 01121 HT22 350 500 364 514 2850 230 50 – 300 19 43 06 01122 HT23 350 500 364 514 2850 230 100 – 370 19 43 06 01123 HT31 430 580 442 592 2000 230 30 – 110 26 43 06 01131 HT32-230 430 580 442 592 4000 230 50 – 300 26 43 06 01132 HT32-400 430 580 442 592 4000 3×400 50 – 300 26 43 06 01232 HT33-230 430 580 442 592 4000 230 100 – 370 26 43 06 01133 HT33-400 430 580 442 592 4000 3×400 100 – 370 26 43 06 01233 Heating Units, Refrigerating Units Temperature Controllers
RkJQdWJsaXNoZXIy MTIxNDc3OQ==