To see other variants and accessories, please enter the webcode on our website. webcode 921 pH Multi-Parameter Measuring Instruments webcode WW2VA023 1 2 3 4 Memosens Analog Converter, Labor-Pilz/Endress+Hauser Memosens analog converter Reliable monitoring of fermentation processes in laboratories The Memosens Analog Converter CYM17 enables the use of digital pH and oxygen sensors in laboratory fermenters without any modifications to the hardware or SOP. The sensors offer you the most reliable data transmission, highest measured value availability and greatest ease of use. Digital Memosens sensors with inductive coupling are resistant to moisture which guarantees maximum accuracy. With the CYM17 Memosens Analog Converter you can now benefit from tried and tested Memosens technology on laboratories too. Simply install theMemosens sensors CPS171D (pH) and COS81D (oxygen) in your existing fermenter and connect them to the converter. Different adapter cables are available for easy and fast conversion. The output signal of the converter corresponds to that of a conventional analog pH or oxygen sensor. Technical data: Output pH: mV signal according to the Nernst equation with 0 mV at pH 7 and -59 mV/pH Temperature pH: simulated PT1000 Output oxygen: 0 to 60 nA with 60 nA at 100% oxygen saturation Temperature oxygen: simulates 22 kOhm NTC Article Order No. 1Converter for Memosens sensors 10 47 41700 pH adapter cable M12 to K8S 10 47 49094 pH adapter cable M12 to VP 10 47 49202 DO adapter cable T82 to VP 10 47 49206 Accessories converter / Memosens digital oxygen sensor Hygienic, optical sensor for stable oxygen measurement over multiple sterilization cycles. Technical data: Sensor type: Memosens digital oxygen sensor Measuring range DO: 0.004 – 26 mg/l 0.05 – 285% SAT 0.1 – 600 hPa Measuring range temp.: -10 – + 140°C (general), 0 – 60°C measurement Autoclavability: yes, max. 140°C (284°F) Length: 120 mm Sensor shaft: stainless steel 1.4435 Process seal: FKM (USP <87>,<88> class VI and FDA) Seal/O-rings: EPDM, FFKM (USP <87>, <88> class VI and FDA Article Order No. 2Optical oxygen sensor COS81D, 120 mm 10 47 48101 Optical oxygen sensor COS81D, 160 mm 10 47 48102 Optical oxygen sensor COS81D, 220 mm 10 47 48103 Optical oxygen sensor COS81D, 320 mm 10 47 48104 Maintenance kit Memosens COV81 10 47 48110 Number of optical caps: 1 piece Typ Optische Kappe: C shape Sensor cap material: stainless steel 1.4435, 316L O-ring material: EPDM Process sealing material: FKM 3Zero-point gel COY8 10 47 48120 Ready-to-use gel for validation, calibration, and adjustment of oxygen and disinfection sensors. The COY8 zero-point gel is available in different bottle sizes. This version is ideally suited for oxygen sensors with a diameter of 12 mm. 4Accessories converter / Memosens digital ph sensor Digital pH electrodes for bioreactors and biotechnology production processes Technical data: Sensor type: Memosens Digitaler pH Measurement range pH: 0 – 14 pH Measurement range temp.: 0 – 100°C, 0 – 14 pH (autoclaving resistant up to 140°C) Length: 120 mm Electrolyte: ion trap, gel electrolyte 3M KCl, pressurized Diaphragm: 1 hygienic diaphragm Article Order No. Digital pH-glass sensor CPS171D, 120 mm 10 47 41711 Digital pH-glass sensor CPS171D, 225 mm 10 47 41712 Digital pH-glass sensor CPS171D, 360 mm 10 47 41713 Measuring Systems Electrochemistry
RkJQdWJsaXNoZXIy MTIxNDc3OQ==