990 Photometers Technical data: Optics: LEDs and photo sensor in transparent sample chamber. Depending on the version, up to 3 different interference filters are used. Wavelength specifications of interference filters: 430 nm D l = 5 nm 530 nm D l = 5 nm 560 nm D l = 5 nm 580 nm D l = 5 nm 610 nm D l = 6 nm 660 nm D l = 5 nm Article Order No. MD 110 chlorine, pH, cyanuric acid, tablet reagents 10 77 10112 MD 110 chlorine, pH, cyanuric acid, liquid reagents 10 77 10152 MD 110 chlorine, pH cyanuric acid, alkalinity-m, tablet reagents 10 77 10702 MD 110 chlorine, pH, cyanuric acid, alkalinity-m, liquid reagents 10 77 10752 MD 110 chlorine, bromine, pH, cyanuric acid, alkalinity-m, calcium hardness 10 77 10902 MD 110 COD 10 77 11302 Flame Photometers webcode WWY3J019 Flame Photometer, A. KRÜSS Optronic Flame Photometer FP8000 Series With the flame photometers of the FP8000 series, even the lowest concentrations (Measuring range: 10 – 2 to 103 ppm) of alkali and alkaline earth elements in aqueous solutions can be determined particularly cost-effectively and user-friendly. The models of the FP8000 series are worldwide unique for the simultaneous measurement of the elements Na, K, Ca and Li in the laboratory and process analysis1). Thanks to proven measuring methods and modern instrument electronics, the flame photometers achieve precise and reproducible measurement results in a matter of seconds with maximum operational reliability. The FP8000 series offers suitable models for individual measurements, fully automatic measuring operation, continuous operation and use as a process instrument. 1)Other alkali and alkaline earth elements on request if required Technical data: Calibration: Linear with 2 standards Non-linear with 6-8 standards, cubic approximation Drift: 1% in 60 min Reference: Lithium guideline with 5 mmol/l Caesium guideline on request Combustion gas: Propane: recommended for alkaline elements Butane: possible substitute for propane Display: with integrated 8.4 ″ TFT touchscreen, 800 × 600 pixels Accessories: 24-character plain paper printer Calibration standards and cleaning solutions Spare parts and accessories directly from the manufacturer Upgradeability: Retrofit kits to other models available FP8400 FP8500 FP8600 FP8700 Measurement range: 0.01 – 4500 ppm für Na/K/Li 0.50 – 4500 ppm für Ca 0,1-45000 ppm für Na/K/Li 5,0-45000 ppm für Ca Sample volume: 2.5 ml 2.5 ml 2.5 ml 0.25 ml Interfaces: 2 × USB 1 × Ethernet 1 × RS-232 for printer 2 × USB 1 × Ethernet 1 × RS-232 for printer Upgrade 4-20 mA analogue, passive current interface 2 × USB 1 × Ethernet 1 × RS-232 for printer 2 × USB 1 × Ethernet 1 × RS-232 for printer Article Order No. FP8400 Flame photometer 10 61 18400 FP8500 Flame photometer 10 61 18500 FP8600 Flame photometer 10 61 18600 FP8700 Flame photometer 10 61 18700 • Don’t waste time waiting for your instrument to Zero after each test. When testing a new sample, zero the instrument once and all subsequent tests of that sample do not require you to re-zero the instrument. • Automatic Data Storage with Transfer Capabilities • The MD 110 automatically stores the last 16 readings with time and date stamp. These results can be transferred to a spreadsheet using the IRiM accessory. • Ergonomic Design Whether you’re using the MD 110 out in the field or in the lab, the design of the instrument makes it easy to handle and view the display. If you’re using the instrument in the lab, the rubber feet on the bottom of the housing eliminates the need for two hand operation or to chase your instrument around the workbench. The listed photometers represent a selection. Other variants are available. Optical Investigations Spectroscopy
RkJQdWJsaXNoZXIy MTIxNDc3OQ==