Continued on next page 992 Electronic Controllers Voltron Power Controllers, messner Power controller with on/off switching using 1-pole potentiometer, standard configuration with insulated fuse holder for fuse replacement from the outside. Use and application as for MES series. Technical data: External W × H × D: 80 × 55 × 150 mm Weight: 0,7 kg Case: polycarbonate plastic Electronics: phase control Power supply: 220 to 240 V~, 50/60 Hz Operating range: 25 to 215/240 V~ Interference suppression: acc. to EN standard Voltron Power Controllers Article Order No. Voltron power controller 10 for ohmic and inductive load 71 65 52302 Rating: 1000 W (5 A), minimum load 40 W Voltron power controller 20 for ohmic and inductive load 71 65 52322 Rating: 2000 W (10 A), minimum load 60 W *VOLTRON-PLUS AC power controllers For the infinitely variable and loss-free control of ohmic and inductive consumers. Special features: • Illuminated ON/OFF rocker switch, 2-pole type, 10 A (4) • IC-controlled, hysteresis-free • Smooth starting • Interference suppression acc. to EN standard • Overvoltage suppressor • Fuse holder with touch guard Switching capacity: max. 2000 W Switching current: max. 10 A Operating range: 0 to 235 V~ Article Order No. *VOLTRON-PLUS AC power controller 71 65 52325 *VOLTRON-PLUS with additional function pilot lamp 71 65 52330 1 Temperature Controllers, messner 1TEMPAT® temperature controller Electronic 2-point controller with fiberglass reinforced plastic housing for controlling heating coils, hot plates, ovens, infrared radiators, water baths, etc. The device has built-in sensor breakdown protection and a switching interval display. The sensor is connected via a tip jack. Technical data: External W × H × D: 110 × 70 × 188 mm Weight: 1 kg Power supply: 220 to 240 V~, 50/60 Hz Rating: 2300 W (10 A) Sensor type Temperature range °C Order No. Pt 100 0 – 100 71 65 50250 Pt 100 0 – 400 71 65 50251 Fe-CuNi 0 – 600 71 65 50252 NiCr-Ni 0 – 1200 71 65 50253 2TEMPAT®-D temperature controller Same as TEMPAT® except with additional built-in digital display for the actual value and encoder switch for selecting the nominal temperature. Sensor type Temperature range °C Order No. Pt 100 0 – 400 71 65 50260 Fe-CuNi 0 – 600 71 65 50261 NiCr-Ni 0 – 1200 71 65 50262 Control Equipment, Evaluation Equipment Electronic Controllers
RkJQdWJsaXNoZXIy MTIxNDc3OQ==